List of Publications

List of filed patents

NoYearPatent Detail
22018Malaysia Patent Application No. PI 2018000918 by Tanveer Saleh et.al. Optical Resolver and Method of use
12016Malaysia-Patent Application No. PI 2016000202 by Tanveer Saleh et al. Angular Sensor

List of edited/authored book

NoYearDetail
12021Micro Electro-Fabrication By Elsevier, https://www.elsevier.com/books/micro-electro-fabrication/saleh/978-0-12-820049-0

List of authored book chapters

NoYearDetail
12014Tanveer Saleh, M. Rahman, Electrolytic In-Process Dressing (ELID) Grinding for Nano-Surface Generation, Comprehensive Materials Processing by Elsevier, Vol 11, PP. 483-522.
22015Tanveer Saleh, Chapter 12: Electro-Discharge Machining For Non-Metal Based Fabrication Process, In: Electrical Discharge machining (EDM), Types, Technologies and Applications. Nova Publishers , New York, pp. 383-424. ISBN 9781634835985 Edited by M.P Jahan, 11/2015.
32017Tanveer Saleh and Rubina Bahar ELID grinding and EDM for finish machining, In Comprehensive Materials Finishing, Elsevier, ISBN 9780128032497, Edited by Saleem Hashmi
42019Tanveer Saleh and Rubina Bahar, Near-Net shape machining by micro-EDM and micro-WEDM, In Micro Electrical Discharge Machining Processes: Technologies and Applications, Springer, ISBN 9789811330742 Edited by Kibria, Golam, Jahan, Muhammad Pervej, Bhattacharyya, Bijoy
52021Wazed Ibne Noor and Tanveer Saleh Electrochemical machining for micro fabrication, in Micro Electro-Fabrication, Edited by Tanveer Saleh Mohamed Sultan Mohamed Ali Kenichi Takahata.

List of peer reviewed journal articles

NoYearDeatil
352021Rashid, M.A.N., Saleh, T. (corresponding author, Noor, W.I. et al. Effect of laser parameters on sequential laser beam micromachining and micro electro-discharge machining. Int J Adv Manuf Technol 114, 709–723 (2021). https://doi.org/10.1007/s00170-021-06908-8
34Daud, N.D., Mohd Ghazali, F.A., Abd Hamid, F.K. et al. Heat-assisted μ-electrical discharge machining of silicon. Int J Adv Manuf Technol 113, 1727–1738 (2021). https://doi.org/10.1007/s00170-021-06734-y
332019Murshiduzzaman, Saleh, T. (corresponding author) & Khan, M.R. Modular robotic platform for autonomous machining. Int J Adv Manuf Technol 105, 2557–2567 (2019). https://doi.org/10.1007/s00170-019-04427-1
32Jarin, S., Saleh, T. (corresponding author), Artificial Neural Network Modeling and Analysis of Carbon Nanopowder mixed Micro Wire Electro Discharge Machining of Gold Coated doped Silicon. (2019). International Journal of Materials Engineering Innovation (Accepted for publication: Invited Paper).
31Islam, S, Saleh, T.(corresponding author), Asyraf, M.R.M., Mohamed Ali, M.S., An ex-situ method to convert vertically aligned carbon nanotubes array to horizontally aligned carbon nanotubes mat. (2019) Materials Research Express,6- 2, 025019.
302018Asyraf, M.R.M., Saleh, T. (corresponding author), Islam, S., Rana, M., Muthalif, A.G.A.,Optical characterization of tip bended Vertically Aligned Carbon Nanotubes array,(2018) Chemical Physics Letters, 711, pp. 37-41.
29Jarin, S., Saleh, T. (corresponding author). Muthalif, A.G.A., Ali, M.Y., Bhuiyan, M.,Towards achieving nanofinish on silicon (Si) wafer by μ-wire electro-discharge machining (2018) International Journal of Advanced Manufacturing Technology, 99,(9-12), pp. 3005–3015.
28Asyraf, M.R.M., Saleh, T. (corresponding author), A Review on Micro-Patterning Processes of Vertically Aligned Nanotubes Array (VACNTs Array), Current Nanoscience, Volume 15 , Issue 4 , DOI: 10.2174/1573413714666180813110942
27Tomal, A N M Amanullah and Saleh, Tanveer (corresponding author). and Khan, Md. Raisuddin (2018) Combination of fused deposition modelling with abrasive milling for attaining higher dimensional accuracy and better surface finish. IIUM Engineering Journal. Vol. Issue.2, 2018.
262017Mohd Asyraf, M.Masud Rana, T. Saleh (corresponding author), Harrison D. E. Fan, Andrew T. Koch, Alireza Nojeh, Kenichi Takahata, Optical Anisotropy in Micromechanically Rolled Carbon Nanotube Forest, Electronic Materials Letters, doi:10.1007/s13391-017-6422-0, 2017.
25Masud Rana, M., Saleh, T.(corresponding author), Mohd Asyraf, M. R., & Muthalif, A. G. A. (2017). Empirical modeling of micromechanical bending process of vertically aligned carbon nanotube forest using response surface methodology. Cogent Engineering, 4(1), 1347078. https://doi.org/10.1080/23311916.2017.1347078
24Mohammad Ahsan Habib, Tanveer Saleh, Mustafizur Rahman, Development of localised electrochemical deposition control system for fabricating micro EDM electrode, International Journal of Machining and Machinability of Materials, 19(3), 260-276, 2017.
23Ibrahim, D.S., Muthalif, A.G.A., Nordin, N.H.D., Saleh, T., Comparative study of conventional and magnetically coupled piezoelectric energy harvester to optimize output voltage and bandwidth, Microsystem Technologies, doi:10.1007/s00542-016-3066-1, 2017.
222016Masud Rana, M. R. Mohd Asyraf, Tanveer Saleh (corresponding author), Abdul Muthalif Asan Gani, Investigation of anisotropic reflectance from densified arrays of vertically aligned carbon nanotube forests (VACNTs). Chemical Physics Letters , 658, 343-346. 2016.
21Sarwar, M.S.U., Xiao, Z., Saleh, T., Nojeh, A., Takahata, K. Micro glow plasma for localized nanostructural modification of carbon nanotube forest, Applied Physics Letters, Volume 109, Issue 8, 081604, 2016.
20M. Masud Rana, M. Asyraf, Tanveer Saleh (corresponding author), Asan Gani, Enhancement of reflectance of densified vertically aligned carbon nanotube forests, Carbon Letters, 18 (1), pp. 67-70, 2016.
19Mohd Asyraf, M.Masud Rana, T. Saleh (corresponding author), Harrison D. E. Fan, Andrew T. Koch, Alireza Nojeh, Kenichi Takahata, A.B. Suriani: Study on Micro-Patterning Process of Vertically Aligned Carbon Nanotubes (VACNTs). Fullerenes Nanotubes and Carbon Nanostructures 24(2), pp.88-99, 2016.
18A. M. A. Al-Ahmari, M. Sarvar Rasheed, Muneer Khan Mohammed, T.Saleh: A Hybrid Machining Process Combining Micro-EDM and Laser Beam Machining of Nickel-Titanium Based Shape Memory Alloy. Materials and Manufacturing Processes, 31 (4), pp. 447-455, 2016.
172015Tanveer Saleh (corresponding author), Aous Naji Rasheed, Asan GA Muthalif, Experimental study on improving μ-WEDM and μ-EDM of doped silicon by temporary metallic coating, International Journal of Advanced Manufacturing Technology, 78 (9-12), pp. 1651-1663, 2015.
16M Rana, M Mrazib, T Saleh (corresponding author), AGA Muthalif, Development Of An Angle Sensor Using Optical Polarizer, ARPN Journal of Engineering and Applied Sciences, 10 (23), pp. 17416-17420, 2015.
152014Mohammed Muntakim Anwar, Tanveer Saleh, John D. W. Madden, Kenichi Takahata (Cover Picture Article),Micropatterning polypyrrole conducting polymer by pulsed electrical discharge. Macromolecular Materials and Engineering, 299 (2), pp. 198-207, 2014.
142013Rasheed Aous Naji, Asan GA Muthalif, Tanveer Saleh (corresponding author), Enhancing μ-wedming (wire electro-discharge machining) of polished silicon wafer by conductive coating, Journal of Manufacturing Technology Research, 5 (2), pp. 1-17, 2013.
13Masoud Dahmardeh, Mohamed Sultan Mohamed Ali, Tanveer Saleh, Tee Min Hian, Mehran Vahdani Moghaddam, Alireza Nojeh, and Kenichi Takahata, High‐power MEMS switch enabled by carbon‐nanotube contact and shape‐memory‐alloy actuator, Phys. Status Solidi A, 210 (4), pp. 631-638, 2013.
122012Tanveer Saleh, Mehran Vahdani Moghaddam, Mohamed Sultan Mohamed Ali, Masoud Dahmardeh, Charles Alden Foell et al. Transforming carbon nanotube forest from darkest absorber to reflective mirror, Applied Physics Letters, 101 (6), pp.061913, 2012.
11Saleh T, Dahmardeh M, Nojeh A, Takahata K. Dry micro-electro-discharge machining of carbon-nanotube forests using sulphur-hexafluoride. Carbon, 52, pp. 288-295, 2012.
102011Tanveer Saleh, Masoud Dahmardeh, Anas Bsoul, Alireza Nojeh, and Kenichi Takahata, Field-emission-assisted approach to dry micro-electro-discharge machining of carbon-nanotube forests, Journal of Applied Physics, 110 (10), 103305, 2011.
9Tanveer Saleh, M. Rahman, In-Process Truing for ELID (Electrolytic In-Process Dressing) Grinding by Pulse Width Control, IEEE Transactions on Automation Science and Engineering 8 (2), pp. 338-346, 2011. .
8Tanveer Saleh and Mustafizur Rahman, A System Development Approach for Electrolytic In-Process Dressing (ELID) Grinding, International Journal of Automation Technology, 5 (1) pp. 21-29, 2011.
72010M. P. Jahan, T. Saleh, M. Rahman, Y.S. Wong, Development, modeling and experimental investigation of low frequency workpiece vibration assisted micro-EDM of tungsten carbide, Transaction of ASME, Journal of Manufacturing Science and Engineering , 132 (5), pp. 054503, 2010.
6Mohammad Ahsan Habib, Tanveer Saleh, Mustafizur Rahman, Modeling for fabrication of micro electrodes by localized electrochemical deposition for micro-EDM, Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 224 (11), pp. 1741-1755, 2010.
5Tanveer Saleh, Indraneel Bishwas, M. Rahman, Efficient dressing of the wheel in ELID grinding by controllable voltage with force feedback, International Journal of Advanced Manufacturing Technology, Vol. 46 (1-4), pp. 123-130, 2010.
4M Rahman, ABMA Asad, T Masaki, T Saleh, YS Wong, A Senthil Kumar, A multiprocess machine tool for compound micromachining, International Journal of Machine Tools and Manufacture, 50 (4), pp. 344-356, 2010.
3Tanveer Saleh, Indraneel Biswas, Han Seok Lim, Mustafizur Rahman, In-process Truing of Metal-bonded Diamond Wheels for Electrolytic In-process Dressing (ELID) Grinding, International Journal of Precision Engineering and Manufacturing 9 (3), pp. 3-6.
22008M. Sazedur Rahman, Tanveer Saleh, H.S. Lim, S.M. Son, M. Rahman, Development of an on-machine profile measurement system in ELID grinding for machining aspheric surface with software compensation, International Journal of Machine Tools and Manufacture, 48 (7-8), pp. 887-895, 2008.
12007Tanveer Saleh, M. Sazedur Rahman, H.S. Lim, M. Rahman, Development and performance evaluation of an ultra-precision ELID grinding machine, Journal of Materials Processing Technology 192, pp. 287-291, 2007.

List of conferences/seminars

NoYearDetails
252021Keynote speaker: Microdrilling using laser-uEDM based sequential process, International webinar on Recent Advancements in Mechanical Engineering, Swami Vivekananda University (SVU), India
242020Keynote Speaker: Micropatterning of vertically aligned carbon nanotubes and its remarkable optical transformation, International Conference on Advancements in Mechanical Engineering, Aliah University, Kolkata, India
23Invited Speech: Micro-patterning of CNT Forest, Swami Vivekananda University (SVU), India
222019Wan Ahmad Bin Wan Azhar , Tanveer Saleh (corresponding author) ,”Development and Performance Evaluation of Modular RC-based Power Supply for Micro-EDM”, 7th International Conference on Mechatronics, IIUM, Malaysia
21Md Shohag Mollik, Wazed Ibne Noor, Tanveer Saleh (corresponding author) and Mohammed Gamal Abdul Hameed Bazarah, “Development of an Active Fixture for Ultrasonically Assisted Micro Electro-Discharge Machining”, 7th International Conference on Mechatronics, IIUM, Malaysia
20Wazed Ibne Noor, Mir Akmam Noor Rashid, Tanveer Saleh (corresponding author) “Micromachining Using Fiber Laser for Various Metallic Workpieces”,
6th International Conference on Engineering Education and Research (FICEER) 2019, Kingdom of Saudi Arabia.
192018Murshiduzzaman, Tanveer Saleh (corresponding author) and Md. Raisuddin Khan, “Hexapod robot for autonomous machining”, 4th International Conference on Mechanical, Automotive and Aerospace Engineering, IIUM, Malaysia
18Saiful Islam, Tanveer Saleh (corresponding author), Marshad Latief, M.R.M Asyraf and Asan GA Muthalif, “Prototype of single degree of freedom optical resolver”, 4th International Conference on Mechanical, Automotive and Aerospace Engineering, IIUM, Malaysia
172017Jarin, Sams, Saleh, Tanveer (corresponding author), Bhuiyan, Moinul, Muthalif, Asan G. A. and Ali, Mohammad Yeakub, “An improved machining process of polished silicon using nano powder mixed micro-wire electro discharge machining”, 2017 World Congress on Micro and Nano Manufacturing , Kaohsiang, Taiwan.
16Tomal, A.N.M.A., Saleh, T (corresponding author), Khan, M.R., “Improvement of Dimensional Accuracy of 3-D Printed Parts using an Additive/Subtractive Based Hybrid Prototyping Approach”, 6th International Conference on Mechatronics 2017, ICOM 2017; International Islamic University Malaysia (IIUM) Gombak CampusKuala Lumpur; Malaysia.
152016Alala Ba hamid, Mohatashem Makhdoomi, and Tanveer Saleh (corresponding author), “An Assistive Robotic Hand Based On Human Computer Interface (HCI) and Shape Memory Alloy (SMA) Actuator”, The 9th International Conference on Robotics, Vision, Signal Processing & Power Applications (2-3 Feb 2016), PARKROYAL Penang Resort, Penang, Malaysia.
14A.N.M. Amanullah, Murshiduzzaman, Tanveer Saleh (corresponding author), Raisuddin Khan, “Design and Development of a Hybrid Machine combining Rapid Prototyping and CNC Milling Operation, Advances in Materials and Processing Technologies, 2016 (AMPT 2016), Kuala Lumpur, 8th-11th November, 2016.
13S. Jarin, T. Saleh (corresponding author), M. Rana ,A. G. A. Muthalif, M. Y. Ali, “ An experimental investigation of gold coated Silicon using Nano powder mixed Micro-Wire Electro Discharge Machining”, Advances in Materials and Processing Technologies, 2016 (AMPT 2016), Kuala Lumpur, 8th-11th November, 2016.
122015Makhdoomi, Mohatashem R. and Ba Hamid, Alala M. and Saleh, Tanveer (corresponding author), “Development and performance evaluation of a linear actuator based wearable assistive device”, 2015 10th Asian Control Conference (ASCC 2015) , Kota Kinabalu, Sabah
11Nordin, Norhidayati Diana and Abdul Muthalif, Asan Gani and Saleh, Tanveer and Zainul Azlan, Norsinnira, “Optimal particle ratio to maximize the dynamic range of Magnetorheological Fluid (MRF) damper for prosthetic limb” 10th Asian Control Conference (ASCC 2015) , Kota Kinabalu, Sabah
10MRazib, MAsyraf and Rana, M. M. and Hassan, M. A. and Saleh, Tanveer (corresponding author), “Application of VACNTs in MEMS devices” World Congress on Microscopy: Instrumentation, Techniques and Applications in Life Sciences and Materials Sciences (WCM 2015) , Mahatma Gandhi University, Kottayam, Kerala, India.
92014M.A Mohd. Razib, Tanveer Saleh (corresponding author), M.A Hassan “Micro-Mechanical Bending (M2B) Method for Carbon Nanotube (CNT) Based Sensor Fabrication” 2014 IEEE International Conference on Smart Instrumentation, Measurement and Applications, 2014, Kuala Lumpur, Malaysia.
8Marsad Latief, MD Azhar Ali, Abdul Mannan, Tanveer Saleh (corresponding author), Moinul Bhuiyan and MD. Raisuddin Khan, “Remote Interior Temperature Control of Parked Vehicles”, International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2014), 23-25 September 2014, Kuala Lumpur, Malaysia.
7Alala M. Ba Hamid, Mohatashem R. Makhdoomi, Tanveer Saleh (corresponding author) and Moinul Bhuiyan, “Development of a Shape Memory Alloy (SMA) based assistive hand”, International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2014), 23-25 September 2014, Kuala Lumpur, Malaysia.
6Aous Naji Rasheed, Asan GA Muthalif, Tanveer Saleh (corresponding author), Improving μ-wire electro-discharge machining operation of polished silicon wafer by conductive coating, International Conference on Micro manufacturing, 2014, 25th March, Singapore.
52013Saleh, Tanveer (2013) “µ-Patterning of Carbon Nanotube patterning of Carbon Nanotube (CNT) forest for MEMS applications” 5th International Conference on Mechatronics (ICOM’13), 2 – 4 July 2013, Kuala Lumpur, Malaysia.
4Saleh, Tanveer (2013) “A new μ-patterning method for Carbon Nanotube (CNT) forest and its remarkable optical transformation” 16th International Conference on Advances in Material and Processing Technology AMPT 2013, 22-26 Sept 2013, Taipei, Taiwan.
32012Tanveer Saleh, Masoud Dahmardeh, Anas Bsoul , Alireza Nojeh, and Kenichi Takahata, A Study Of Dry Micro-Electro-Discharge Machining Of Carbon- Nanotube Forests With Reverse Polarity, IEEE MEMS 2012, Paris, France, 29th Janury-2nd February, 2012.
22009M.P. Jahan, T. Saleh, Y.S. Wong and M. Rahman, Study of micro-EDM of tungsten carbide with workpiece vibration, Advances in Materials and Processing Technologies conference (AMPT 2009), 26 – 29 October, 2009, Kuala Lumpur.
12004Al Mamun, T. Saleh, Z. Zhu, H.H. Yap, and V. Prahlad, “Design and fabrication of a gyroscopically stabilized single-wheeled robot”, Proceedings of the IEEE Conference on Robotics,Automation and Mechatronics 2004 (RAM04), Singapore, Dec 01-03, 2004.